Activity logs Accesses HowTo's/Configuration Reporting Vulnerabilities
Overview Kerio Control allows configuring advanced DHCP settings, such as lease time, DNS server, gateway, etc. In specific NAS or SMS gateway environments, DHCP lease interval may be requested too of...
Overview While trying to configure QoS and bandwidth management rules for RingCentral traffic, the specific Kerio Control settings need to be applied. This article provides detailed information on how...
Overview While reviewing Host logs, you may notice frequent DHCP lease requests for particular devices: [06/Oct/2020 14:45:45] [IPv4] 10.0.4.45 [MAC] 80-82-23-61-bf-a8 [Hostname] Sados-iPhone - IP add...
Overview When viewing the Active Connections on the Kerio Control Administration interface, the Source Country and Destination Country columns always come up empty/blank. This article provides an expl...
Overview While trying to access Kerio Control via MyKerio, the appliance keeps dropping the network connection. Occasionally, you may receive the appliance cannot be reached right now MyKerio error. D...
Overview While having Kerio Control non-transparent proxy server enabled, you might receive a DNS lookup failed. This message was created by Kerio Control Proxy error. Such a message is shown in the w...
Overview When trying to set users' bandwidth limitations for specific URLs or categories, Kerio Control settings should be modified accordingly. The requirements are to enable a Daily quota for all us...
Overview While trying to upload video content to Streaming services, it might be required to reserve a minimum bandwidth value. This way it's guaranteed the PC with a specific IP address gets the mini...
Overview The intrusion prevention system in your environment reports that different DNS queries are trying to resolve some hostnames/URLs. It reports this traffic as MALWARE-CNC DNS suspicious .bit dn...
Overview When configuring Kerio Control with 2 or more internet interfaces in Load Balancing mode for Dynamic DNS, you want Kerio Control to send the IP address to the Dynamic DNS provider (like DynDN...