This section describes all Kerio Control VPN related articles
Overview After installing Kerio Control VPN Client on Mac, a message appears that the Kerio Control VPN Client service is not running The VPN client Error log generates the following entries: vpncore:...
Overview When trying to install or upgrade Kerio VPN client on Windows OS, the installer stops, and displays the error 28201: device is already registered or unspecified error 0x800F020B or 0x800F0244...
Overview The VPN Client or the Active side of the VPN Tunnel selects the cipher and the connection will be established if the peer/host supports the selected cipher. We have two main change in this ...
Overview If a Kerio Control user needs to access services hosted on the Kerio Control VPN Client, you can assign a static IP address to the Kerio Control VPN Client. Notes: Do not set the same IP addr...
Overview Kerio IPsec VPN tunnel allows the administrator to connect users located in separate geographic areas into a single network. Kerio Control allows configuring the IPSec tunnel with 3rd-party r...
Overview The Kerio VPN Server needs a DNS server, like other networking devices and elements, to resolve URLs into IP addresses. This article provides the steps required to configure Kerio Control to ...
Overview Kerio VPN Server offers clients a secure way to connect to the network using devices such as desktops, notebooks, and mobile devices. You must enable communication through a VPN in Traffic Ru...
Overview By default, routes to all local subnets at the VPN Server's side are already defined. In certain environments, the absence of custom routes may lead to VPN bottlenecks and slow bandwidth perf...
Overview Kerio VPN tunnel allows the administrator to connect officers located on separated geographic areas into a single network. Kerio VPN tunnel offers authentication and encryption to ensure a fa...
Overview If Kerio Control is load balancing between multiple Internet links, it is possible to use VPN failover. This ensures that a VPN tunnel is re-established automatically in case the primary link...
