Articles

Issue/Error Messages, Reference and/or NonAdmin HowTo's about: Backups Directory Services Domains Network Interfaces

• Configuring Multiple IPs with Native WAN

  Overview When configuring an Internet/WAN Interface in Kerio Control, there could be a requirement to add additional IP addresses to the interface due to some setup in your environment or a requiremen...

• Resolving Internet Connectivity problems for Load Balancing mode

  Overview While reviewing Kerio Control Interfaces settings, one of the interfaces is showing a Connectivity problem state. The Internet connectivity mode is set to Multiple links with Load Balancing a...

• Separating Internet connections using Load Balancing mode

  Overview While having two separate Internet links, it is possible to use Load Balancing mode for Internet interfaces. The second interface can be used to pass a specific portion of traffic to the outs...

• Setting priority tag to 802.1p VLAN

  Overview While trying to configure the PPPoE connection with a VLAN interface, it might be required to specify the priority parameter. This is used as part of the 802.1pQ configuration. Kerio Control ...

• WiFi and Guest Interface Connectivity is Intermittent

  Overview The built-in WiFi connection on the Kerio Control NG300 series appliance keeps on dropping and that SSID disappears. The Guest interface stays stuck at Connecting, but all the LAN interfaces ...

• Using only HTTPS for Accessing Kerio Control Web Interface

  Overview In order to access the Kerio Control Web interface using only HTTPS, HTTP Strict Transport Security (HSTS) should be implemented on Kerio Control. Solution Login to Kerio Control web interfac...

• VLAN tab is missing from the Interface Properties window

  Overview When editing a particular interface in Kerio Control, you might find that the VLAN tab is missing from the properties window, thus preventing the creation of a VLAN Interface, whereas, other ...

• Separate Traffic when using VLANs

  Overview When using VLANs with Kerio Control, there could be a need to separate traffic between different sets of users (eg: staff and customers), to limit and/or monitor their usage. Solution When co...