Issue/Error Messages, Reference and/or NonAdmin HowTo's about: Backups Directory Services Domains Network Interfaces
Overview Kerio Control supports Point-to-point protocol over Ethernet, so-called PPPoE. Some Internet providers use PPPoE to create tunnels for connecting you to the Internet. Configure a PPPoE interf...
Overview Kerio Control represents a gateway between two or more networks, typically between the local network and the Internet. The default network interface routing controls traffic passing through n...
Overview: Kerio Control includes the embedded WiFi access point. For more information refer to Managing WiFi in Kerio Control NG100W and NG300W. This article describes how to run WiFi interfaces in ...
Overview Kerio Control NG100W and Kerio Control NG300W include an embedded WiFi access point, which provides connectivity for wireless devices such as cell phones, tablets, and laptops. The Kerio Cont...
Overview Kerio Control Web Interface is encrypted with SSL by default. If you need to switch to the HTTP connection, this article provides the step-by-step guide. Step-by-Step Guide Using HTTP for acc...
Overview MAC addresses are unique identifiers that identify devices in a network. Some routers or ISPs (Internet Service Providers) only allow specific MAC addresses for specific devices. When you nee...
Overview Ethernet Ports configuration in Kerio Control's hardware devices is doable as Standalone or in a LAN bridge. Standalone interface maintains its own network with a separate IP subnet and optio...
Overview The guest network in Kerio Control offers the company's guests Internet access secured by Kerio Control. Guests can connect to your network without a Kerio Control username and password or it...
Overview The customer experiences a slow connection with the pages loading and has reported that the Wi-Fi connection is considerably slow. Environment Applicable to all Kerio Control versions. Root C...
Overview There are two ways to disable Kerio Control's protocol inspectors, this article covers both processes: In the Services section, to disable protocol inspection for all traffic. In the Traffic ...
