Overview

Kerio Control is based on the Linux kernel. Thus, Kerio Control has a predefined list of compatible hardware. It includes storage controllers, network cards, Wi-Fi routers, USB dongles, access points (AP), and other Wi-Fi devices (such devices help set up the Wi-Fi connection for the company personnel).

If a device (for example an NVMe drive) is not present in the attached list, it means that it will not be supported by Kerio Control.

Information

The below list of the supported PCI/USB devices is separated by type, brand (vendor), device name, and the corresponding driver/module. This information can be useful when purchasing new hardware for Kerio Control.

Please note that the wireless adapters are not loaded or used unless the Kerio Control appliance is a known hardware box: NG110, NG310, NG510, NG511, etc. You will not be able to see them in the webadmin portal.

The first 10 PCI devices are listed below:

#	Type	Vendor ID	Vendor	Device ID	Device Name	Subdevice Name	Driver
1	PCI	103C	Hewlett-Packard Company	3230	Smart Array Controller	P700m SAS Controller	cciss
2	PCI	103C	Hewlett-Packard Company	3230	Smart Array Controller	E500 SAS Controller	cciss
3	PCI	103C	Hewlett-Packard Company	3238	Smart Array E200i (SAS Controller)	Smart Array E200	cciss
4	PCI	103C	Hewlett-Packard Company	3238	Smart Array E200i (SAS Controller)	Smart Array E200i	cciss
5	PCI	103C	Hewlett-Packard Company	3230	Smart Array Controller	P400i SAS Controller	cciss
6	PCI	103C	Hewlett-Packard Company	3230	Smart Array Controller	P400 SAS Controller	cciss
7	PCI	103C	Hewlett-Packard Company	3230	Smart Array Controller	Smart Array P800	cciss
8	PCI	103C	Hewlett-Packard Company	3220	Smart Array P600	3 Gb/s SAS RAID	cciss
9	PCI	0E11	Compaq Computer Corporation	0046	Smart Array 64xx	Smart Array 6400 EM	cciss
10	PCI	0E11	Compaq Computer Corporation	0046	Smart Array 64xx	Smart Array 6400	cciss